Dr. Sanjay Kumar Jha

Contact Us

Email - sanjayjha@bitmesra.ac.in
Phone - 9431173491

PUBLICATION

Research Publications

 

(A) Paper published in National Conference (26)

1.

Jha.S. K, Kumar .S and Varma. A, “VAT analysis an effective tool for modeling factory automation”, Proceeding of All India Seminar on Design of Production Systems- New concepts, Bhubaneswar,26th July 1998, PP- 57 – 60.

2.

Jha.S. K, and Kumar .S, “Robotics and Manufacturing Automation”, Proceeding of National conference on manufacturing challenges in 21st century, BHU Varanasi, , PP-SII B3.1- SII B3.12,January 8 – 9 2000.

3.

Jha.S. K, and Kumar .S, “ A cost effective approach for improving productivity of rural artifacts manufacturing-with special reference to Jharkhand state”, Proceeding Of 18th AIMTDR conference on IT based manufacturing, BIT Mesra, Ranchi, 2002, PP-781-786.

4.

Jha.S. K, and Kumar .S, “ Mechatronics Integration & Complexity Involved in CAD / CAM workstation”, Proceeding Of 18th National convention of mechanical engineers on Emerging trends in Mechatronics for automation, Rourkela, November 9- 10,2002, PP-202-209.

5.

Jha.S. K,Role & Application of mechatronics in CAD / CAM workstation design”, All India workshop on- Application of Mechatronics in Indian scenario, Ranchi, September 28- 29 ,2002.

6.

Jha.S. K, Kumar .S and Agarwal. M, “Application of Value engineering on Aluminium artifacts manufacturing”, CD Proceeding of XIIIth INVEST national conference on Global competitiveness through value engg., Mumbai, Nov.23rd 2002.

7.

Ranjan .R, Jha.S. K, Singh .S and Singh R.K, “Value analysis from the prospective of competitive advantage and its application to industry: A case study of motherboard.” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence,B.I.T Mesra , Ranchi , 26th -27th July-2003.

8.

Ranjan .R and Jha.S. K, “Value engineering and its application in industry: A case study of Ceiling fan.” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence,B.I.T Mesra , Ranchi , 26th -27th July-2003.

9.

Srivastava S.C, Jha.S. K and Ranjan .R, “Application of value engineering in hotel management.” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence,B.I.T Mesra , Ranchi , 26th -27th July-2003.

10.

Ranjan R.K, Jha.S. K and Kumar .S, “P/M Products: The winning challenges.” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence,B.I.T Mesra , Ranchi , 26th -27th July-2003.

11.

Ranjan .R, Jha.S. K, Singh .S, Kumar. A and Singh P.K, “Value Engineering and its application in educational Institution: A case study of Time analysis.” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence,B.I.T Mesra , Ranchi , 26th -27th July-2003.

12.

Ranjan .R, Jha.S. K, Singh .S, Sinha. A and Kumar S.B, “Powder Metallurgy forging finds a better space among conventional manufacturing techniques: A value facturing approach.” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence,B.I.T Mesra , Ranchi , 26th -27th July-2003.

13.

Pandey .V, Jha.S. K and Ranjan .R, “A case study of value engineering in bicycle design.” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence, B.I.T Mesra , Ranchi , 26th -27th July-2003.

14.

Agarwal. M and Jha.S. K, “Metal Forming Tribology: Research Potential” e-Proceeding of World Workshop on Foundry, Forge & Forming, National Institute of Foundry and Forge Technology, Ranchi, 17th -18th August 2005.

15.

Jha.S. K and Kumar. S, “Stress, Health and productivity: case study of artefacts manufacturing units of Jharkhand” Proceeding of National Seminar on Focus Human Resource, College of Agribusiness Management, Pantnagar, 8th -9th April -2006.

16.

Jha.S. K and Kumar. S, “Dokra Brass Artefacts from Jharkhand: Glorious past and uncertain future” Proceeding of National Seminar on Bharatiya Heritage in Engineering and Technology, Indian Institute of Science, Bangalore , 11th -13th May -2006.

17.

Pathak. P, Jha.S. K, Singh. A. P, and Rai. D, “Improvement in rolling rate of thin gauge steel strips at a tandem cold mill” CD Proceeding of 3rd National workshop on Precision Forming: Modeling, analysis and system development, B.I.T Mesra, Ranchi, 15th -16th Feb -2010.

18.

Jha.S. K and Suman. S, “Knowledge Based Decision Support System In Steel Industries” Proceeding of National Conference on Competitive Manufacturing: Strategies & Decision Support Systems, GLA University, Mathura, PP 369-380, 5th  - 6th  November -2011.

19.

Singh. A. K, Acharya.D.S and Jha.S. K, “ A Generalized Model of Green Manufacturing for Manufacturing Process using Fuzzy Logic” e-Proceeding of 27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing - Vision 2020, B.I.T Mesra, Ranchi, 25th -26th May -2012. 

20.

 Suman. S, Singh. R. K and Jha. S. K,“ A Multi-Objective Decision Support System for Optimization of Ferro-Alloy Cost During Steel Making” e-Proceeding of 27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing - Vision 2020, B.I.T Mesra, Ranchi, 25th -26th May -2012. 

21.

Manoharan. P.K., Jha. S. K and Singh. B. K,“ Analysis of load and gradient effect on hand force responses during brick carrying in a Brick kiln” e-Proceeding of 27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing - Vision 2020, B.I.T Mesra, Ranchi, 25th -26th May -2012. 

22.

Singh. A.K and Jha. S. K,“ Exploring Possibilities of Green Manufacturing: Positioning and Orientation Using Fuzzy Logic” e-Proceeding of 27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing - Vision 2020, B.I.T Mesra, Ranchi, 25th -26th May -2012. 

23.

Singh. A.K and Jha. S. K, “ Sustainability assessment using Analytical Hierarchy Process: A case study” e-Proceeding of All India Seminar on Technology Solution in Manufacturing, B.I.T Mesra, Ranchi, 01st -02nd  march -2013. 

24.

Baug. T.K, Pattanaik. L. N & Jha. S. K, “ Selection of lean tools for achieving sustainability in manufacturing”, e-Proceeding of All India Seminar on Technology Solution in Manufacturing, B.I.T Mesra, Ranchi, 01st -02nd  march -2013. 

25.

Kumar. P, Jha. S. K and Srivastava. S.C, “ Design, development and analysis of the friction stir welding process”, e-Proceeding of All India Seminar on Technology Solution in Manufacturing, B.I.T Mesra, Ranchi, 01st -02nd  march -2013. 

26.

Singh. A.K. and Jha. S. K, “Perspectives On Green Manufacturing” e-Proceeding of All India Seminar on Recent Advancement in Manufacturing and its Management, B.I.T Sindri, Dhanbad, 07th -08th Feb -2014. 

 

(B) Paper published in International Conference (8)

1.

Jha. S. K, Kumar. S and Jha A. K, “Value engineering an effective tool for improving productivity of rural artifacts manufacturing-with special reference to Jharkhand state”, Proceeding of International conference on manufacturing, Dhaka (Bangladesh), Vol.2, PP-491-497, 2002.

2.

Pathak. P, Jha. S. K, Singh. A. P, and Mondal. N, “Genesis of surface blemishes on cold rolled strips” Proceeding of 5th International conference on Iron & Steel Making, Visakhapatnam, 6th -7th August -2010.

3.

Pathak. P, Jha. S. K, Singh. A. P, and Rai. D, “Study on effect of roll bite lubrication on rolling parameters of hot strip mill” poster presentation on 7th International conference on Industrial Tribology, SAIL, Ranchi, 2nd -4th  December 2010.

4.

Prakash. P, Jha. S. K & Lal S. P, “Investigations of friction stir welding of metallic materials”, e-Proceeding of International conclave on Innovation in Engineering and Management, BIT Mesra, Patna Centre, 22nd -23rd February -2013. 

5.

Singh. A.K, Shukla. S, and Jha. S. K, “Comparative Study of Green Manufacturing Process in Brick Industries using AHP and Decision Tree” Proceeding of 1st International conference on Mechanical Engineering emerging Trends for Sustainability, MNIT, Bhopal, PP-701-709, 29th -31st January -2014.

6.

Jha. S. K & Pandey. S, “A Review on Aluminium Metal Matrix Composite Fabricated through Centrifugal Casting” Proceeding of International Conference on Evolutions in Manufacturing: Technologies and Business Strategies for Global Competitiveness, Organized by Institution of Engineers (India), Jharkhand State Centre in association with Department of Production Engineering, BIT Mesra, Ranchi, PP-107-113, 12th-13th November -2016.

7.

Malhotra. A & Jha. S. K, “Forecasting Techniques for Intermittent Demands using a Case Study of a Company” Proceeding of International Conference on Evolutions in Manufacturing: Technologies and Business Strategies for Global Competitiveness, Organized by Institution of Engineers (India), Jharkhand State Centre in association with Department of Production Engineering, BIT Mesra, Ranchi, PP-299-304, 12th-13th November -2016.

8.

Pandey. S & Jha. S. K, “Casting Defects and its Optimization Method in Centrifugal Casting Process: A Review” Proceeding of International Conference on Advances in Materials and Manufacturing (ICAMM ‘17), Organized by National Institute of Foundry and Forge Technology, Hatia, Ranchi, PP-72-76, 19th-21st January -2017.

 

 (C) Paper published in National Journal (18)

1.

Ranjan. R, Jha. S. K and Singh. S, "Frictional Conditions during sinter forming,” Journal of CMTI- Manufacturing Technology Today, Vol.2, Issue – 10, PP-12-16, Oct – 2003.

2.

Pandey. V, Jha. S. K and Ranjan. R, "A case study of value engineering in Bicycle design,” Journal of VE for the Indian Value engineering Society - INVAVE, Vol. 12, No. 1&2, PP-9-17, April – September 2003.

3.

Jha. S. K and Jha. A. K, “Manufacturing metal artefacts by Dokra casting: a treatise with techno – economic aspects with respect to Jharkhand state”, Journal of Current Sciences, Vol. 5, Number 1, pp 127 – 132, 2004. 

4.

Jha. S. K, “Effect of musculoskeletal discomforts on productivity of rural artefacts manufacturing industries workers in Jharkhand”, Journal of Current Sciences, Vol. 5, Number 2, pp 495 – 500. 2004.

5.

Jha. S. K and Kumar. S, "A cost effective approach for improving productivity of rural artefacts manufacturing-with special reference to Jharkhand state,” Journal of CMTI-Manufacturing Technology Today, Bangalore. 

6.

Jha. S. K, Singh. S and Kumar. S, “Investigations into heterogeneous deformation of sintered preform due to Die – work piece interfacial friction”, Indian Journal of Tribology, Tribology society of India, Vol.3, No 1, PP 7-13, Jan-June 2008.

7.

Pathak. P, Jha. S. K, Sengupta. P. P and Singh. A. P, “Investigations into High speed Rolling of Thin Gauge Strips for Improving their Rolling Rate at 5-STAND TANDEM COLD MILL”, Journal of STEEL INDIA, PP. 181-188, Volume 34, No. 2, SEP 2011.

8.

Jha. S. K, Singh. A. K and Prakash. A, “Understanding Green Manufacturing (GM)”, Journal of Production Research and Management, PP. 33-45, Volume 4, Issue 1, May 2014. 

9.

Prakash. P, Jha. S. K & Lal S. P, “Emerging Modeling and Simulation Techniques for Friction Stir Welding - A Review”, ELK Asia Pacific Journals, Special Issue, PP.: 288-295, April -2015. 

10.

Singh. A, Jha. S. K & Prakash. A, “Imperatives of Green Manufacturing”, ELK Asia Pacific Journals, Special Issue, pp: 472-478, April -2015. 

11.

Prasad. K, Jha. S. K & Lal. S. P, “Understanding Quality in Home Based Brassware Manufacturing Units in India”, ELK Asia Pacific Journals, Special Issue, pp: 479-483, April-2015

12.

Mohd. Hassan, Jha. S. K, & Pandey. P, “Metal Foam by Powder Metallurgy Route: A Review Paper”, Journal of Production Research and Management, PP. 9-15, Volume 6, Issue 1, Feb 2016.

13.

Prakash. P, Lal. S. P, and Jha. S. K, “Numerical Investigation of the Plunge Stage in Friction Stir Welding Using Various Tool Pin Profiles” ELK Asia Pacific Journals, Special Issue, PP. 168-172, April 2016.

14.

Singh. A. K, Jha. S. K, Prakash. A, and Sukla. S. S, “A Decision-Making Model for Green Manufacturing using Analytical Hierarchy Process and Grey Relation Grading” ELK Asia Pacific Journals, Special Issue, PP. 113-116, April 2016.

15.

Singh. A. K, Jha. S. K, Prakash. A, and Aggarwal. H, “Life Cycle Assessment of Polyethylene Terepthalate (PET) Bottles” ELK Asia Pacific Journals, Special Issue, PP. 122-128, April 2016.

16.

Mohd. Hassan, Jha. S. K, & Pandey. P, “Analysis and Optimization of Parameters in Submerged Arc Welding Process using Taguchi Methods and Regression Analysis” ELK Asia Pacific Journals, Special Issue, PP. 173-177, April 2016.

17.

Mohd. Hassan, Jha. S. K, & Pandey. P, “Submerged Arc Welding: A Review Paper” ELK Asia Pacific Journals, Special Issue, PP. 232-236, April 2016.  

18.

Pandey. S, Jha. S. K, Kumar. P, and Bharat. A. K, “Analysis of Defects for Aluminium Copper Bimetal Fabricated by Centrifugal Casting” ELK Asia Pacific Journals, Special Issue, PP. 1-6, April 2016.  

 

(D) Paper published in International Journal (24)

1.

Jha. S. K and Kumar. S “Assessment of productivity of items manufactured by rural artefacts community- with special reference to Jharkhand state (India)”, The international journal of applied management and technology, Vol. 4, No. 2, PP – 288 -320, November 2006. 

2.

Jha. L. M and Jha. S. K, “Multi-Agent Based Web Manufacturing Management System in Tribal Artifact Production”, The international journal of applied management and technology, Vol. 5, No. 1, PP. 139-158, May 2007.

3.

Pathak. P, Singh. A. P, Rai. D, Roy. B and Jha. S. K, “Tribological Approach for Improvement in Surface Quality of Hot and Cold Rolled Steel Strips”, International Journal of Manufacturing Technology & Research, Vol. 5, No.1-2, pp. 93-100, Jan-Jun 2009. 

4.

Prakash. A, Jha. S. K and Kallurkar. S. P, “Attitudes of Indian Towards service Quality for Life Insurance in India”, International Journal of Research in Computer Application and Management, VOL. 1, ISSUE NO. 9, PP -57-63, Nov 2011. 

5.

Jha. V. K, Jha. S. K and Prakash. P, “Data Mining Application Using Decision Tree and ANN for Predicting Surface Roughness of End Milling Manufacturing Process”, International Journal of Computer Science Engineering and Information Technology Research, VOLUME NO. 1, ISSUE NO. 2, PP -61-68, 2011. 

6.

Pathak. P, Jha. S. K, Sengupta. P. P and Singh. A. P, “Development of Superior Quality Rolling Oils for Performance Improvement Of 5-STAND TANDEM COLD MILL”, THE ANNALS OF “DUNAREA DE JOS UNIVERSITY OF GALATI FASCICLE VIII, TRIBOLOGY, Vol. XVII, Issue 2, PP. 25-31, 2011.

7.

Manoharan. P. K, Jha. S. K and Singh. B. K, “Ergonomics investigation using Psycho-physiological study for Brick kilns’ In Jharkhand”, International Journal of Environmental Sciences, PP. 1484-1491, Volume 2, No 3, 2012. 

8.

Pathak. P, Jha. S.K and Singh. A.P, “Tribological Approach for Improvement in Productivity and Quality of Flat Rolled Steel Products: A Review”, International Journal of Applied Science & Technology Research Excellence, PP. 196-202, Volume 2, Issue 2, 2012. 

9.

Suman. S, Singh. R. K, Jha. S. K and Jha. V. K, “A Multi Objective DSS for Optimization of Ferro- Alloy Cost Using LIPSOL”, International Journal of Technical Research (IJTR), PP. 26-35, Volume 1, No 1, 2012.

10.

Manoharan. P. K, Jha. S. K and Singh. B. K, “Modeling the risk factors in ergonomic processes in Brick kilns workers using Fuzzy Logic”, International Journal of Applied Sciences and Engineering Research, PP. 92-97, Volume 1, No 1, 2012.

11.

Suman. S and Jha. S. K, “Knowledge based decision support system in steel industries”, International Journal of Manufacturing Technology and Research, PP. 16-21, Volume 8, No 1, 2012. 

12.

Prakash. A, Jha. S. K and Mohanty. R. P, “Scenario Planning for Service Quality: A Monte Carlo simulation study”, International Journal of Strategy and Management, PP. 331-352, Volume 5, Issue 3, 2012.

13.

Prasad. K. D, Jha. S. K and Singh. R. K, “Productivity Assessment of Utensils Manufacturing Unit: A Case Study”, International Journal of Innovative Research in Science, Engineering and Technology, PP. 2360-69, Volume 2, Issue 6, 2013. 

 

14.

Prakash. P, Jha. S. K and Lal. S. P, “A Study of Process Parameters of Friction Stir Welded AA 6061 Aluminum Alloy”, International Journal of Innovative Research in Science, Engineering and Technology, PP. 2304-09, Volume 2, Issue 6, 2013.

 

15.

Singh. A. K, Shukla. S. S and Jha. S. K, “Green Manufacturing Practices in Brick Industries: A Case Study Using AHP”, International Journal of Innovative Research in Science, Engineering and Technology, PP. 2236-42, Volume 2, Issue 6, 2013. 

16.

Singh. A. K, Jha. S. K and Prakash. A, “Green Manufacturing (GM) Performance Measures: An Empirical Investigation from Indian MSMEs”, International Journal of Research in Advent Technology, PP. 51-65, Volume 2, No. 4, April 2014. 

17.

Singh. A. K, Jha. S. K, and Prakash. A, “Adoption of Green Manufacturing (GM) in Selected Indian Industries”, International Journal of Applied Engineering Research, PP. 20383-20404, Volume 9, No. 23, December 2014. 

18.

Prasad. K. D, Jha. S. K and Prakash. A, “Quality, Productivity and Business Performance in Home Based Brassware Manufacturing Units”, International Journal of Productivity and Performance Management, Vol: 64, PP. 270-287, issue: 2, Feb 2015. 

19.

Manoharan. P. K, Jha. S. K and Singh. B. K, “Analysis of Load And Gradient Effect on Hand Force Responses During Brick Carrying In A Brick Kiln”, International Journal of Applied Engineering Research, PP. 35332-35336, Volume 10, No. 15, August 2015. 

20.

Prasad. K. D, Jha. S. K and Singh. R. K, “Implementation of Quality Improvement Tools in Brassware Manufacturing Unit to Improve Quality & Enhance Productivity”, International Journal of Applied Engineering Research, PP. 3580-3590, Volume 11, No. 5, March 2016.

21.

Prakash. A, Jha. S. K, Prasad. K. D, & Singh. A “Productivity, Quality and Business Performance: An Empirical Study”, International Journal of Productivity and Performance Management, Vol: 66, PP: 78-91 Issue: 1, Jan 2017.

22.

Pandey. S, Parhi. S, and Jha. S. K, “Effect of the Mould Rotational Speed on the Quality of Bimetallic Pipe Fabricated by Centrifugal Casting Process”, International Journal of Emerging Research in Management and Technology, PP. 215-222, Volume 6, No. 7, July 2017.

23.

Prakash. P, Jha. S. K and Lal. S. P, “Effect of Tool-Pin Profile on Weld Zone and Mechanical Properties in Friction Stir Welding of Aluminium Alloy”, Pertanika Journal of Science and Technology, PP. 853-862, Volume 26, No. 2, April 2018. 

24.

J. Abhilash, V. Sudheer Kr, Acherjee. B, Jha. S. K and S. Deepak. Kr, “SIMULATION OF FRICTION STIR WELDING PROCESS USING ANSYS”, International Journal of Advance and Innovative Research, PP. 98-102, Volume 5, No. 2, June 2018.

 

 

 

(E) Books Published (05)

Sl. No.

Title of the Book

ISBN / Year

Publisher

1.

Value engineering

81-7319-578-1

2005.

Narosa Publishing House Pvt. Ltd.,

New Delhi.

2.

Productivity Enhancement of Rural Artefacts Manufacturing.

 

978-3-8465-0913-5

2011.

LAP LAMBERT Academic Publishing.

Germany.

3.

Knowledge Based Decision Support System for Steel Industries.

978-3-659-30548-1

2013.

LAP LAMBERT Academic Publishing.

Germany.

 

4.

Design and development of service quality model- An applied orientation in life insurance business.

978-3-659-47819-2

2013.

LAP LAMBERT Academic Publishing.

Germany.

5.

Practices of Green Manufacturing in selected Indian Industries.

978-3-659-89805-1

2016.

LAP LAMBERT Academic Publishing.

Germany.

 

(F) Books Chapter Published (04)

Sl. No.

Title of the Book

Author’s Name, Chapter no.& Title, Vol. No. and Page No.

Year of Publication /ISBN No.

Publisher

1.

Value Engineering and Cost Control

Author’s Name: S. K. Jha

Chapter 16: Value analysis/Value engg: Worksheets,

PP: 212 – 232.

 

2008

9788110037680

 

Dhanpat Rai & Co.

2.

Industrial Pollution and management

Author’s Name: S. K. Jha

Chapter 26: Manufacturing metal artefacts by Dokra casting

PP: 247 – 256.

 

2004

81-7648-774-0

 

APH Publishing Corporation

3.

LNEE, Computer, Informatics, Cybernetics and Applications

Author’s Name: Manoharan. P. K, Jha. S. K and Singh. B. K

Chapter 89: Modeling the risk factors in ergonomic processes using fuzzy logic.

PP.827-832

Volume 107, Part-I

doi:10.1007/978-94-007-1839-5-89

(SCOPUS)

 

2012

978-94-007-1839-5

 

 

Springer

4.

Innovations in Soft Computing and Information Technology

Author’s Name:S. Deepak Kumar, S. K. Jha,D. Karthik & S. K. Parida

Chapter 24: Optimization of Semi-solid-Forging Parameters of A356–5TiB In Situ Composites Using ANSYS and DEFORM Simulation

PP: 279 -286

Volume: 03

https://doi.org/10.1007/978-981-13-3185-5_24

2019

978-981-13-3185-5

 

Springer