Birla Institute of Technology, Mesra
   
Dr. L. N. Pattanaik
Associate Professor, Production Engineering
Ph.D
Contact Address
Permanent Address __
Local Address Dept. of Production & Industrial Engg. B.I.T, Mesra, Ranchi-835215
Phone (Office) 0651-2275044/+91-9430731527
Phone Residence __
Email Id lnpattanaik@bitmesra.ac.in
Joined Institute on : 24-Oct-2005
  Work Experience
 
Teaching : 25 Years

Research : 17 Years

  Professional Background

Education:

  • Ph.D from Dept. of Mechanical & Industrial Engineering, IIT-Roorkee, 2005-06
  • M.Tech from Department of Mechanical Engineering, IIT-BHU, Varanasi, 1997  

Experience: 25 years of experience in teaching and research

Present additional assignments:

  • Associate Dean (Post Graduate Studies)  
  • Faculty Advisor SIME (Society for Industrial Management and Engineering)
  • University Coordinator, Shodhganga, Inflibnet-UGC

 

  Research Areas
 
  • Optimization of Manufacturing Systems and Supply Chains
  • Lean,Cellular and Reconfigurable manufacturing/Assembly
  • Soft Computing Applications to Manufacturing
  • Modeling and Simulation

 

  Award and Honours
 

MHRD, Govt. of India scholarship during M.Tech and Ph. D

Qualified in Graduate Aptitude Test in Engineering (GATE) in Mechanical Engineering 

Co-Organizing Secretary, 21st National Convention of Production Engineers & National Seminar on Best Practices in Manufacturing, December 10-11, 2006 held at Ranchi

Organizing Secretary, 27th National Convention of Production Engineers & National Seminar, May 25-26, 2012 held at Ranchi

Organizing Secretary, All India Seminar "Technology solution in manufacturing"  of IEI, March 1-2, 2013 held at Ranchi

Best Paper award in International Conference on Signal processing, Control & Data Analytics (ICSCD-2015)

Chaired technical session at 7th International and 28th AIMTDR conference (2018) held at Anna University, Chennai

Chaired technical session at NCRAME-2019, BIT, Mesra

Empanelled as Lean Manufacturing Consultant (in individual category) by National Productivity Council (NPC), New Delhi.

Invited expert lectures delivered:

  • On "Robust Design/Design of Experiments" and "Evolutionary Algorithms for Optimization" in FDP of VSSUT, Burla 

  • On "AI applications to Manufacturing" in FDP of BIT, Sindri, Dhanbad

  • On "Adapting Lean Manufacturing for Industry 4.0: Scopes and Challenges" in Webinar of NPC

  • On "Lean and Agile Supply Chain for Dynamic Market and Mass Customization" in Webinar of NPC 

  • On "Machine Learning Applications in Research" FDP on ML in Mechanical Engineering at NIT, Patna  

  • On "Soft computing tools in optimization" National Workshop on Emerging Techniques in Mechanical Engineering, BIT, Mesra

  • On "Hypothesis Testing" at Two day workshop Data Analytics for Engineers, IEI-JSC, Ranchi

  • On "Regression Modelling-Multivariate/Non-linear" at Two day workshop Data Analytics for Engineers, IEI-JSC, Ranchi

  • On "Tools for Lean Sigma Applications-Part I & II" at one week training on Lean Six Sigma, BIT, Mesra

  • On "Lean manufacturing using cellular machine layout" at NIT-Rourkela

  • On "Lean tools for enhancing business management" at National Productivity Council Seminar, Ranchi

  • On "Statistical tools for Six-sigma implementation" National Workshop, BIT, Mesra

  • On "Soft computing tools and techniques" National Workshop, BIT, Mesra

  • On "Metal Machining and machine tools" National Workshop, BIT, Mesra

   Publications
 

International Journals/Indexed book chapters:

SCI/Scopus

  • Pattanaik L. N. and Rajeev Kant (2022) Optimization of a multi-objective lean assembly problem with reconfigurable machine cells, IMechE Part B: Journal of Engineering Manufacture, https://doi.org/10.1177/09544054221111895 (SCI)  
  • Pattanaik, L. N., Paras Agarwal, Urja Narayan and Saloni Ranjan (2022) Optimal Adaptation of Supply Base in Dynamic Demand Cycles of a Reconfigurable Supply Chain, International Journal of Integrated Supply Management (Inderscience) DOI: 10.1504/IJISM.2022.10048483 (Scopus)
  • Pattanaik, L.N., Gupta A.K., Surin S., Singh A.P. (2021) Application of Clustering Algorithms for Locating Distribution Centers of Logistics System. In: Mahapatra R.P., Panigrahi B.K., Kaushik B.K., Roy S. (eds) Proceedings of 6th International Conference on Recent Trends in Computing. Lecture Notes in Networks and Systems, vol 177. Springer, Singapore. https://doi.org/10.1007/978-981-33-4501-0_46
  • Pattanaik, L. N., Munda, P., Jyoti, & Kumar, A. (2020). Selection of optimal capacity for reconfigurable machines during lean manufacturing. IOP Conference Series.Materials Science and Engineering, 912(3) doi:http://dx.doi.org/10.1088/1757-899X/912/3/032059
  • Pattanaik, L.N., Koteswarapavan C. (2020) Assessment of Lean Manufacturing Using Data Envelopment Analysis (DEA) on Value-Stream Maps. In: Deepak B., Parhi D., Jena P. (eds) Innovative Product Design and Intelligent Manufacturing Systems. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-2696-1_84
  • L. N. Pattanaik (2021) Simulation Optimization of Manufacturing Takt Time for a Leagile Supply Chain with a De-coupling Point, International Journal of Industrial Engineering and Management, 12 (2), 102-114. (Scopus)
  • L. N. Pattanaik et al. (2021) Simultaneous Parametric Optimization of Micro-EDM Process for Brass C360 using Taguchi based Grey Relation Analysis, Engineering Review, 41(1) (online first) (ESCI/Scopus)
  • L. N. Pattanaik et al. (2020) Sequential Optimization of Reconfigurable Machine Cell Feeders and Production Sequence during Lean Assembly,  International Journal of Computer Integrated Manufacturing, 33(1), 62-78.  Taylor & Francis/SCI (Impact Factor: 2.09)
  • L. N. Pattanaik et al. (2019) A Hybrid ELECTRE Based Prioritization of Conjoint Tools for Lean and Sustainable Manufacturing, Production Engineering, 13, 665-673. (Springer/Scopus)
  • L. N. Pattanaik and Abinash Jena (2020) Selection of optimal assembly strategy at an engine assembly plant using fuzzy multi-criteria decision-making tools, Int. J. Industrial and Systems Engineering, Vol 36, No. 2, 281-299. (Inderscience/Scopus)
  • L. N. Pattanaik (2020) Self-Organizing Migrating Algorithm to Minimize Module Changes at Machine-Level in Reconfigurable Manufacturing, Lecture Notes on Multidisciplinary Industrial Engineering, M. S. Shunmugam and M. Kanthababu (Eds): Advances in Simulation, Product Design and Development, 978-981-32-9486-8 (Springer Nature/Scopus)
  • Pattanaik L.N., Paras Agarwal, Saloni Ranjan and Urja Narayan (2020), Bi-objective Optimization of a Reconfigurable Supply Chain Using a Self-organizing Migration Algorithm, Advances in Computational Intelligence, Advances in Intelligent Systems and Computing 988, pp. 39-53. (Springer Nature Singapore/Scopus)
  • Kumar A., Pattanaik L.N., Agrawal R. (2019) Multi-objective Scheduling Model for Reconfigurable Assembly Systems. In: Chattopadhyay J., Singh R., Bhattacherjee V. (eds) Innovations in Soft Computing and Information Technology. Springer/Scopus, Singapore, pp 209-217.
  • L. N. Pattanaik and Abinash Jena (2019), “Tri-objective optimization of mixed model reconfigurable assembly system for modular products”, International Journal of Computer Integrated Manufacturing, 32:1, 72-82. Taylor & Francis/SCI (Impact Factor: 1.995)
  • Avinash, K., Pattanaik, L. N. and Rajeev Agrawal (2019), “Optimal sequence planning for multi-model reconfigurable assembly system”, The International Journal of Advanced Manufacturing Technology 100: 1719-1730. Springer/SCI (Impact Factor:2.601)
  • Pattanaik, L. N. and Kumar, V., (2011), “Product family formation for reconfigurable manufacturing using a bi-criterion evolutionary algorithm”, International Journal of Industrial Engineering-Theory, Applications and Practice, Vol 18(9), pp 493-505. (ISSN 1943-670X) SCI indexed.
  • Pattanaik, L. N. and Sharma, B. P., (2009), “Implementing Lean Manufacturing with Cellular Layout: A Case Study”, International Journal of Advanced Manufacturing Technology, Vol.42, pp.772-779.(Springer-Verlag) (ISSN 0268-3768) SCI Indexed, Impact factor-2.601
  • Pattanaik, L. N., Jain, P. K. and Mehta, N. K.(2007), “Cell formation in the presence of reconfigurable machines”, International Journal of Advanced Manufacturing Technology, Vol. 34, pp.335-345.(Springer-Verlag) (ISSN 0268-3768) SCI Indexed, Impact factor-2.601
  • Pattanaik, L. N., Jain, P. K. and Mehta, N. K. (2004), “An inter-cell flow reduction heuristic using production volume of parts”, International Journal of Simulation Modelling, Vol. 3, No. 2-3, pp. 90-101. (ISSN 1726-4529) SCI indexed.
  • Kant R., Pandey V., Pattanaik L.N. (2017), An NSGA II-Based Approach for Optimization of Reconfigurable Cellular Manufacturing System. In: Sahana S., Saha S. (eds) Advances in Computational Intelligence. Advances in Intelligent Systems and Computing, vol 509. Springer.
  • L. N. Pattanaik, Rajeev Kant and Anurag Anand, (2016), "A Fuzzy based Need Assessment Model for Reconfigurable Manufacturing System", Journal of Manufacturing Technology Research, Vol 7, No. 3-4 (ISSN:1943-8095) Scopus Indexed.
  • L. N. Pattanaik and Gaurav Yadav, (2015), "Decision Support model for Automated Railway Level Crossing System using Fuzzy Logic Control", Procedia Computer Science (Elsevier), Vol 48, pp.73-76 (Scopus Indexed).
  • L. N. Pattanaik and Himanshu Agarwal (2015), "Magnetorheological Finishing (MRF) of a Freeform Non-magnetic Work Material", Journal for Manufacturing Science and Production, Vol 15 (ISSN 2191-0375) Emerging Sources Citation Index (De Gruyter).
  • Rajeev Kant, L. N. Pattanaik and V. Pandey (2015), "Framework for strategic implementation of cellular manufacturing in lean production environment", Journal of Manufacturing Technology Research, Vol 6, No. 3-4 (ISSN:1943-8095) Scopus Indexed.
  • Richa Pandey, L. N. Pattanaik and S. Kumar (2014), "Fuzzy linguistic hedges for the selection of manufacturing process for prosthetic sockets", Decision Science Letters, 3, 259–268. (ISSN 1929-5804)  Scopus Indexed.
  • Pandey, R. and Pattanaik, L. N. (2014) ‘A fuzzy QFD approach to implement reverse engineering in prosthetic socket development’, Int. J. of Industrial and Systems Engineering, Vol. 17, No. 1, pp.1–14 (ISSN 1748-5037) (Inderscience Publishers) Scopus Indexed.
  • Rajeev Agrawal, L. N. Pattanaik and S. Kumar. (2012), "Scheduling of a flexible job-shop using a multi-objective genetic algorithm", Journal of Advances in Management Research, Vol 9 (2), pp 178-188. (Emerald Publishers)  (ISSN 0972-7981) Scopus Indexed.
  • Pattanaik, L. N. and Kumar, V., (2010), “Multiple levels of reconfiguration for robust cells formed using modular machines”, International Journal of Industrial and Systems Engineering, Vol. 5, No. 4, pp.424-441. (Inderscience Publishers). (ISSN 1748-5037) Scopus Indexed.
  • Pattanaik, L. N., Jain, P. K. and Mehta, N. K. (2007), “Solving multi-objective cell design problem: An evolutionary genetic algorithm approach”, International Journal of Manufacturing Technology and Management (special issue on: Cooperative Intelligent Environments for Design and Manufacturing), Vol. 11, No. 2, pp.251-273.(Inderscience Publishers). (ISSN 1368-2148)  Scopus Indexed.
  • Pattanaik, L. N. and Agarwal, H., (2014), “Development of Magnetorheological Finishing Process (MRF) For Freeform Surfaces”, International Journal of Advanced Mechanical Engineering, Vol. 4, No.6, pp. 611-618. (ISSN 2250-3234)
  • Pattanaik, L. N. (2013), "Applications of Soft computing tools in Metal forming: A state-of-art review", Journal of Machining and Forming Technologies, Vol 5, Issue 1-2, pp 29-44. (ISSN 1947-4369)
  • Richa Pandey, L. N. Pattanaik and S. Kumar, (2010), "A reverse engineering based process for contextualizing and digitizing ancient technical objects", Manufacturing Technology & Research, Vol. 6 (1), pp. 45-52. (ISSN 0973-0281)
  • Pattanaik, L. N., Jain, P. K. and Mehta, N. K.(2007), “A genetic algorithm based approach to machine grouping in cellular manufacturing using a new similarity measure”, Manufacturing Technology and Research, An International Journal, Vol. 3, No. 1 & 2, pp.43-49. (ISSN 0973-0281)

International Conferences

  • L. N. Pattanaik, Amit Gupta, Shifa, A. K. Singh, “Application of Clustering Algorithms for Locating Distribution Centers of Logistics System” Proceedings of 8th International Conference on Recent Trends in Computing (ICRTC-2020), July 3-4, 2020, SRM University, Delhi-NCR Campus, Ghaziabad.
  • A. K. Nandi and L. N. Pattanaik, “Design and development of a web-based robotic simulator”, Proceedings of International Conference on Recent Advances in Computational Techniques (e-IC-RACT 2020), June 26-27, 2020, Amity University, Mumbai.   
  • L. N. Pattanaik, Amit Kumar, Jyoti, Pooja, “Selection of optimal capacity for reconfigurable machines during lean manufacturing”, Proceedings of 3rd International Conference on Advances in Mechanical Engineering (ICAME 2020), Feb 24-29, 2020, SRM University, Chennai.
  • L. N. Pattanaik and Ch. Koteswarapavan, “Assessment of Lean Manufacturing Using Data Envelopment Analysis (DEA) on Value Stream Maps”, Proceedings of 1st International Conference on Innovative Product Design and Intelligent Manufacturing System (ICIPDIMS-19), 17-18 May, 2019, NIT-Rourkela.
  • L. N. Pattanaik, “Self-Organizing Migrating Algorithm to Minimize Module Changes at Machine-Level in Reconfigurable Manufacturing”, Proceedings of 7th International & 28th All India Manufacturing Technology, Design and Research Conference 2018 (AIMTDR 2018), 13-15th December 2018, Anna University, Chennai, India. (Springer)
  • L. N. Pattanaik, P. Agarwal, S. Ranjan and U. Narayan, “Bi-objective Optimization of a Reconfigurable Supply Chain using a Self-Organizing Migration Algorithm”, Proceedings of International Conference on Computational Intelligence (ICCI), 10-11 December, 2018, BIT-Mesra, Ranchi, India. (Springer)
  • Avinash Kumar, L. N. Pattanaik and Rajeev Agrawal, “Multi-objective Scheduling Model for Reconfigurable Assembly Systems,” International Conference on Energy, Materials and Information Technology (ICEMIT ’17), Ranchi, 22-23 December, 2017.
  • L.N. Pattanaik and Abinash Jena, “Selection of Reconfigurable Assembly Systems Strategy using Fuzzy TOPSIS”, Proceedings of International Conference on Advances in Mechanical Engineering Sciences, Pages 105, 21st – 22nd April 2017, P.E.S. College of Engineering, Mandya.
  • L.N. Pattanaik and Abinash Jena, “Research Issues in Design and Operation of Reconfigurable Assembly Systems” Proceedings of International Conference on “Evolutions in manufacturing: Technologies and Business Strategies for Global Competitiveness”, Pages 215-219, 12th – 13th November 2016, BIT, Mesra.
  • Rajeev Kant, V. Pandey and L. N. Pattanaik, (2016), "Lean Agile and Leagile Supply chain: A comparative study", Proceeding of 2nd International conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering, April 15-16, 2016.
  • L. N. Pattanaik, Rajeev Agrawal and Lakshmi Kumari, (2016), "Model of a fuzzy autonomation system for a steel wire roll mill", Proceeding of 3rd IEEE International Conference on Recent Advances in Information Technology, RAIT-2016, March 3-5, ISM Dhanbad. ISBN 978-1-4799-8578-4.
  • Rajeev Kant, V. Pandey and L. N. Pattanaik (2015), "An NSGA-II based approach for optimization of reconfigurable cellular manufacturing system", presented in  International Conference on Computational Intelligence, 10-11 December, BIT-Mesra, Ranchi, India.
  • Rajeev Kant, L. N. Pattanaik and V. Pandey (2015), "Heuristic for enabling lean characteristics in cellular manufacturing using reconfigurable machines", International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering (ARIMPIE-2015), April 10-11, 2015.
  • L. N. Pattanaik and Gaurav Yadav, (2015), "Train Detection at Railway Level Crossing Using Background Subtraction Approach of Image Processing", International Conference on Signal processing, Control & Data Analytics (ICSCD-2015) Online, March 2015, San Diego, USA. (Best Paper Award)
  • L. N. Pattanaik and Gaurav Yadav, (2014), "Decision Support model for Automated Railway Level Crossing System using Fuzzy Logic Control", International Conference on Intelligent Computing, Communication & Convergence (ICCC-2014), Bhubaneswar, India.
  • L. N. Pattanaik and Himanshu Agarwal, (2014), “Development of Magnetorheological Finishing Process (MRF) For Freeform Surfaces”, 4th International Conference on Advances In Mechanical, Material, Manufacturing, Automobile and Aeronautical Engineering (AMAEAP-2014), June 7-8, JNU, New Delhi.
  • L. N. Pattanaik, Sudhir Kumar and Srikrishna Purohit, (2014), Machinability Improvement Through Heat Treatment of SAE-1050 Steel, Proceedings of 1st International Conference on Mechanical Engineering: Emerging Trends for Sustainability, 29th - 31st January, MANIT, Bhopal, India.
  • L. N. Pattanaik and Tapan Kumar Baug (2014), An AHP-based Selection of Lean Tools For Achieving Sustainability In Manufacturing, Proceedings of 1st International Conference on Mechanical Engineering: Emerging Trends for Sustainability, 29th - 31st January, MANIT, Bhopal, India.
  • P. Bannerjee and L. N. Pattanaik, (2013), Model of An Intelligent Automobile Driving Assistance System, Proceedings of  9th International Conference on Intelligent Unmanned Systems (ICIUS), 25-27 September, Jaipur, India.
  • Pattanaik, L. N. and B. K. Jena (2012), "Optimization of Aluminum die casting process using ANN",4th International and 25th AIMTDR conference, JU, Kolkata.
  • Pattanaik, L. Net al (2011), "Fuzzy model for the austenite grain refinement in the plate rolling of low carbon steel", International Conference on Agile Manufacturing Systems, Dayalbagh Educational Institute, Agra, India.
  • Pattanaik, L. N., Malhotra, S. and Jha, N., (2010), “Fuzzy logic based selection of process parameters during Electron Beam Machining”, Proceedings of ICTACEM, (Int. Conference on Theoretical, Applied, Computational and Experimental Mechanics), Dec 27-29, 2010, IIT-Kharagpur, pp 189-192.
  • Pattanaik, L. N. and Goenka, N. (2010), “Machine cell formation using genetic algorithm for minimization of inter-cellular movement”, Proceedings of 3rd International and 24th AIMTDR, Dec 13-15, 2010, Andhra University, Visakhapatanam.
  • Pattanaik, L. N. et al. (2010), “Scheduling of a flexible job-shop using a multi-objective genetic algorithm”, Proceedings of 3rd International and 24th AIMTDR, Dec 13-15, 2010,  Andhra University, Visakhapatanam.
  • Pattanaik, L. N., Jain, P. K. and Mehta, N. K., (2005), “Cell formation using modular-reconfigurable machines”, Proceedings of 16th International DAAAM Symposium, 19-22nd October, Opatiza, Croatia.
  • Pattanaik, L. N., Jain, P. K. and Mehta, N. K., (2003), “ A new similarity-coefficient based heuristic for cell design”, Proceedings of 14th International DAAAM symposium, Vienna, Austria, October 22-25.
  • Pattanaik, L. N., Jain, P. K. and Mehta, N. K., (2003), “A new cell design heuristic using operation sequence of parts”, e-Proceedings of International Conference on CAD, CAM, Robotics and autonomous Factories (INCARF), IIT, Delhi, August 11-13.

        

 

  Text and Reference Books
 

Authored Book titled "Analytical Tools in Research" 

Analytical Tools in Research AND Applied Mechanics And Design - L N Pattanaik (google.com)

  Fellow
 

FIE - Fellow of Institution of Engineers (India)

  Member, Editorial Board
 

Referee of SCI journals 

  • Production Planning and Control (Taylor & Francis)

  • CIRP Journal of Manufacturing Science and Technology (Elsevier)

  • International Journal of Production Research (Taylor & Francis)

  • International Journal of Advanced Manufacturing Technology (Springer Verlag)

  • Transactions of the Society for Modeling and Simulation International

  • International Journal of Advanced Operations Management (Inderscience Publisher)

  • Journal of Advances in Management Research (Emerald Publishing Ltd)

  • Assembly Automation (Emerald Publishing Ltd)